Can not disable scan sound "beep"

Tagged: Escape APDU, sound

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
February 27, 2019 at 12:15 pm #64884

Andrey
Participant

Hey Flomio team.

I’m trying to disable the “beep” sound that occurs when a tag gets placed and removed.

defaultConfiguration.scanSound = false
Does not seam to do anything.

I’m using the FlomioSDKPro 3.0-beta with FloBLE Plus.

Any ideas?

March 5, 2019 at 11:11 am #64920

Andrey
Participant

Scott? Richard? Anyone have any idea why I’m not able to disable the sound?

March 21, 2019 at 10:47 am #64988

Richard
Keymaster

Hi Andrey, scanSound boolean is for disabling a tone sound within the SDK running on your mobile device. In other words, once the reader alerts the SDK of a tag scan the mobile device can generate a scan sound (or not). In order to disable the sound of the reader itself you will need to issue the following Escape APDU on connection: E00000210107

best,
Richard

May 31, 2019 at 9:12 pm #65403

Linda
Participant

Hi,

I’m also trying to disable the sound on a FloblePlus. I’ve tried sending APDU E00000210107, but I get response 63 00 and the device continues to beep when tags are scanned. Is there something else I can try to troubleshoot?

Thanks,
Linda

June 5, 2019 at 6:41 pm #65421
Andrey
Participant
Hey Richard. Getting the same 63 00 response as Linda. I’m running FlomioSDK Pro version 3.0 Beta. Is there a more up to date version of the SDK perhaps?
```
Command APDU:E0 00 00 21 01 07
 Response Apdu: 63 00
 handleApduResponse: Operation was unsuccessful.
```
- This reply was modified 7 years ago by Andrey.
June 5, 2019 at 7:04 pm #65423

Andrey
Participant

I’m using the following method to send the command:
flomioSDK.sendApdu("E0 00 00 21 01 07", toDevice: deviceUid, success: nil)

June 10, 2019 at 9:59 am #65439

Richard
Keymaster

Not sure what’s going on but here is the documentation page I referred to:

What firmware version does your FloBLE devices have? Have you been able to execute other Escape commands successfully?

best,
Richard

June 18, 2019 at 8:50 pm #65472

Linda
Participant

Hi Richard,

Thanks for the link to the documentation.

I tried sending “E0 00 00 18 00” to get the firmware version, but received “63 00” as a response for that as well. Is there another way I can check firmware version?

I have not been able to execute other Escape commands.

Thanks,
Linda

July 24, 2019 at 1:52 am #65600

francis
Participant

Have you had any success with this? Can’t manage to get anything other than “63 00″, much less turn the beeping off
Author

Posts