Hi Flomies,
I have run some more test for the issue I mentioned in the post at https://flomio.com/forums/topic/floble-continuous-operation-issue/
I used a field detector to determine whether the reader is still scanning but generating very low field when it goes into this “sleep” mode thus seeming to be asleep. The findings are as below.
– When the reader goes into this state, The blue blinking light stops blinking
– The field detector doesn’t detect any field when in this state
– didUpdateConnectedDevices does not get called
Additional information at hand:
– There is only one session manager created at the app launch
– Our app connects to the FloBLE device just fine and the two stay connected
– Due to the nature of the app, both the app and the FloBLE need to be connected 24/7. To accomodate this functionality, both the readers and the iPad are always connected to a wall charger
– At an unknown time (sometimes a day or two), the FloBLE stops the blue blinking light and stops registering tags.
– At this point, the reader needs to be turned off and back on again
Regards,
Malik
