Home › Forums › Ask the Flomies › About Orders › Re. order #61270
Tagged: Flomio SDK, NFC Actions
-
AuthorPosts
-
October 17, 2017 at 5:41 am #61305
I ordered FloBLE Plus but apparently got an ACR 1255U-J1.
According to your web site:
“The FloBLE and the ACR1255U-J1 are hardware equals. However, only FloBLE Plus will work with the Flomio SDK and derived applications.”I need it to work with the Flomio SDK.
Also I cannot use NFC Actions to read or write to a simple tag via iPhone 7.
October 17, 2017 at 8:22 am #61307Hi Niels, you can order a license of the Flomio SDK Basic here. You will need to send us your device’s Serial Number (list on back on reader unit) so that we can enable this license for you. Then you can write applications using the SDK and with cloud connectivity.
NFC Actions for reading and writing NFC tags works with iOS11 on the App Store. Which version have you installed and how have you tried to perform read/write actions? More details on usage here:
best,
RichardOctober 17, 2017 at 8:35 am #61308Hi Richard, Thanks for the information about the SDS license.
Regarding NFC Actions, I have downloaded the version available in App Store ver. 2.1.7(1).
When I start the app, the Device ID of the reader comes up, and the logs says No tags scanned yet.
I then try to swipe the reader across a NFC Forum Type 4 Tag (which the iPhone itself is capable of reading)
I get absolutely no visual or audible feedback from the reader no matter what I do.
Of course writing data to the tag does also not work.The reader shows one blue blinking LED (lower LED) during all this.
Obviously I am doing something wrong – I just can’t figure out what.
October 18, 2017 at 1:02 pm #61324October 24, 2017 at 9:01 pm #61382Niels, the update (and fixed) version of NFC Actions has been posted to the App Store. It may take a few days to be approved so in the meantime you can get it via TestFlight by registering here: https://nfcactions.herokuapp.com/
best,
Richard -
AuthorPosts
You must be logged in to reply to this topic.